- Rubber Gaskets
- 2017-12-25 23:38
- Rubber gasket are the most widely used of the gasket, it with polymer be vulcanized, adding fillers, pigments and various additives composed of synthetic rubber, has quite excellent compressibility and resilience, only need very much at the end of the pre
- Double Jacketed Gaskets
- 2017-11-27 21:42
- Metal jacketed gasket filled with the flexible graphite, ceramic fiber, asbestos and non-asbestos sheets as well as packed with the metal plates of stainless steel, tinplate, and red copper, is especially suitable for high temperature and high pressure se
- Non Asbestos Sheets
- 2017-11-25 01:27
- Asbestos fiber sheet is made of asbestos fibre, rubber and heat-resisting packing material, compressing it to thick sheet. It is used for the equipment in water, steam, etc., and used as sealing material in the joints of pipeline.
- Graphite Sheets
- 2017-11-19 23:13
- Reinforced expanded graphite sheet is comprised of expanded graphite sheet and various steel sheets such as tangled, flat or mesh. It has character of thermally stability, high strength and no cold flow etc. It is an ideal material of all kinds of reinfor
- Grooved Gaskets
- 2017-11-04 09:35
- Corrugated Metallic Gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to p
- Graphite Gaskets
- 2017-11-01 12:24
- Reinforced graphite gasket is an improved semi-metal gasket, which is the compound of expanded graphite. Its performance is excellent in corrosion proof, high temperature resistant, elastic, and strength, It is suitable for pipe, valve, pump, pressure con
- Rubber Sheets
- 2017-10-31 23:58
- Product: rubber sheet black color; Specification: 1-80mmx2000mm(TXW); Performance: With middle pressure, good water proof, anti shock and sealing performance; Density: 1.6g/Cm3; Tensile strength: >3.0MPa; Hardness: 75shoreA; Elongation: >200%; Work temper
- Braided Graphite PTFE Packing for pumps and valves
- 2017-10-22 00:18
- Braided Graphite PTFE Packing for pumps and valves is a braided packing made of PTFE yarn without soaking any PTFE dispersion and lubrication but with greatly enhanced ability to seal high speed shafts with the addition of inactive and heat-resisting agen
- PTFE Sheets
- 2017-10-14 23:11
- PTFE sheet is manufactured by molding method with PTFE granular resin. PTFE is the most chemical resistance of all known plastics. It does not age. It has the lowest coefficient of friction of all known solid materials and a wide range of practicable temp
- Flange Insulation Gaskets
- 2017-10-04 13:08
- Flange Insulation Gasket Sets are used to solve the sealing and insulating problems of flanges, and to control losses due to corrosion and leakage of pipelines. They are widely used to seal flanges and control stray electric currents in piping at oil, gas
- Carbon Fiber Packing
- 2017-09-25 04:22
- Carbonized fiber packing is manufactured by heating polyacrylonitrile fiber into carbonized fiber, which is then braided into packing after impregnation in PTFE dispersion. This item has good heat conduction and low corrosion rate,and the price is relativ
- wire reinforced Ceramic fiber braided packing rope
- 2017-09-13 05:05
- Conditions: Ceramic fiber braided packing rope is used as heat insulation in industrial furnace, gas and chemical equipment, pipe’s heat insulation, sealing material for pumps, compressor, and valves’s heat preservation, as well as outside jacketed materi
- Graphite Packing
- 2017-09-07 12:17
- Expanded graphite packing is braided from high-grade low sulphur expanded graphite yarn. This item has superior resistance from high temperature and chemical corrosion,as well as other special sealing effects.It's widely used in steam valves of powder sta
- Asbsetos Packing
- 2017-09-04 14:13
- Asbestos PTFE packing is made of white asbestos fiber cords impregnated with PTFE dispersion. Soft in texture, this material is suitable for sealing pumps for various chemicals. However, packing impregnated with lubricants is recommended for use with reci
- Ring Joint Gaskets
- 2017-08-31 03:12
- Ring Joint Gasket is the sealing gasket of various forms processed from the solid metals of various materials through mechanical cutting by high precision CNC lathes. Featuring small installation area and high pretension pressure
- Synthetic Fiber Rubber Gaskets
- 2017-08-30 21:21
- Non-asbestos gasket is cut from non-asbestos fiber sheet. We could produce any size according customer's request. Material: BA-U,Klinger,Garlock,Durlon.
- PTFE Gaskets
- 2017-07-26 21:11
- PTFE Gasket is made by cutting PTFE stick, pipe and sheet into flat shape, v shape gasket or valve annulus. It has 100% PTFE structure and has characteristics of high-temperature-proof, strong-corrosion-proof and clean. As a sealing element it can be used
- Tape Gaskets
- 2017-07-21 02:31
- It is produced with pure PTFE and it presents: High chemical resistance(pH0-14), Temperature resistance: -200'C up to +260'C, Unchangeable during the time, In-combustibility
- Aramid Packing
- 2017-07-08 19:35
- Aramid (Kevlar) packing is made from a kind of high-strength orgnaic fiber, impregnated with PTFE dispersion and lubricant. This material is suitable for use as dynamic sealing in medias that contain solid particles.
- PTFE
- 2017-07-04 05:15
- PTFE has a wide range of practicable temperature from 180%°C - +260°C and a wax-like surface to which anything hardly sticks.
