EKEF ball screw end support bearing consists of EK fixed end and EF support end. The fixed end EK is made of high carbon steel with built-in pre-pressurized P0 backlash angular contact ball bearings for high rigidity and accurate positioning; the support
The support track shaft is a key part used to support and guide the moving parts in mechanical equipment, usually made of high-quality alloy steel with hardened or chrome-plated surface, possessing high strength and wear resistance. It can be used in conj
3003 H112 4104 Brazing aluminum Plate is an AL-Mn series rust-proof aluminum alloy, containing manganese to improve corrosion resistance and formability. The H112 state means that the aluminum plate is naturally hardened after hot working and forming.
30
Both 5754 aluminum alloy and 5052 aluminum alloy are aluminum-magnesium alloys, but the magnesium content of 5754 aluminum alloy is higher, between 2.6-3.6%. Its corrosion resistance to seawater and salt spray is about 30% higher than that of 5052. It is
6061-T6 is an Al-Mg-Si alloy. After T6 heat treatment, the tensile strength reaches more than 200MPa. The surface hardness of 6061-T6 aluminum tread plate is HB=90, which can withstand high-load friction and impact.
The aluminum oxide layer on the surfac
1050 1060 1100Perforated Aluminum Sheet all belong to 1 series pure aluminum sheet, with high aluminum content, good ductility, conductivity and corrosion resistance.
?1050 perforated aluminum plate?: The aluminum content of 1050 aluminum plate is =99.5%
2024 aluminum alloy sheet is commonly used in aerospace structural parts. For example, 2024 thin aluminum sheet is specially used for high-strength load-bearing parts such as aircraft skins and wing beams. With its high specific strength characteristics,