Tetraethylammonium Bromide,Phase Transfer Catalystshttp://www.koyonchem.com/phase-transfer-catalysts/quaternary-ammonium-salt/tetraethylammonium-bromide.html
Monobloc Heating Air To Water Heat Pump,Home Heat Pumphttp://www.powerworldhp.com/heat-pump/home-heat-pump/monobloc-heating-air-to-water-heat-pump.html
Main parts:
a. Hydraulic decoiler 1set
b. Roll forming machine 1set
c. Hydraulic shearing machine 1set
d. Hydraulic station 1set
e. Digital control cabinet 1set
A. Hydraulic decoiler (with hold down arm)
Welded channel steel and s
Function of slitting line:
Metal coil slitting lines: Slitting lines are longitudinal cutting jumbo metal coils into more narrow coils. Usually slitting lines are consisted of four main parts: decoiler, slitter, tensioner and recoiler. Metal strip is f
1. Raw Material: carbon steel
2. Raw Material Thickness: 1mm~6mm
3. Raw Material Width : 100~850mm
4. Inner diameter: F508mm
5. Outer diameter: F500mm~F1500mm
6. Maximum loading weight: 10tons(MAX)
B. Baby coil parameters:
1. Maximum
Stainless Steel Flying Shear Cut to Length Line
80m/min flying shear cut to length machine used for decoiling coil, leveling sheet then cutting sheet to required dimensions as per PLC order, then stacking sheets in pallet. it is widely used in steel plat
Specifications & parameters:
1. Material: cold rolled, hot rolled, galvanized steel, stainless Steel
2. Raw material thickness: 0.3 to 3.0 mm
3. Raw material width: 500~1500mm(max)
4. Outer diameter of coil: 800mm~2000mm (max)
5. Inner diam
Function of cut to length line:
A CTL will take a jumbo coil, flatten and cut to length sections to a precise length and stack the sheets into a bundle. Machine will be designed according to the width, thickness and incoming coil weight. The strip is f
1. Main Parameter:
A. Incoming coils parameters:
1. Material: stainless steel, aluminum coil etc
2. Raw material thickness: 0.3 to 2.0 mm
3. Raw Material Width : 300~1500mm
4. Inner diameter: F508mm, F610mm
5. Outer diameter: F500mm~F180